A few of the floors we've finished recently, from Castle Rock and Battle Ground to Portland and out to Sunriver, plus a start-to-finish look at a Winter Cabin flake garage.
Get a Free EstimateWinter Cabin flake, installed start to finish. Diamond-ground prep, crack repair, 100% solids epoxy base with flake broadcast to refusal, a Flake Lock coat, then a polyaspartic topcoat. Flake carried up the stem wall and the walls as a cove base. Watch the whole process below.
The whole process, from grinding to the finished floor.
The finished floor with the topcoat.
Full diamond-grind prep, 100% solids epoxy base, Mountain Fog flake broadcast to refusal, polyaspartic topcoat. Wall-to-wall coverage including under the water heater and furnace.
Walkthrough of the finished floor.
Graphite in the 1" brindle chip — a large-format flake that reads like terrazzo rather than a fine speckle — under a high-gloss polyaspartic topcoat. Flake carried up the wall as an integral cove base, and the pad under the water heater coated to match, so no bare concrete is left in the room.
Quartzite in the 1" brindle chip on a bare new-construction slab — diamond-ground and coated wall to wall. Same angles, before and after.
Before
After
Before
After
Walkthrough of the finished floor.
Waterproof deck coatings on decks, balconies, porches and concrete, along with cable, glass and aluminum railing. Select any photo to view it full screen and zoom in.










Free in-home estimates across Vancouver WA and the Portland OR metro. Physical sample boards you can touch.
GET MY FREE ESTIMATE